Appendices

Creating ftp Profiles Using the Camera Menus

In transfer mode, the camera menus can be used to create ftp profi les in place of the WT-3 Setup Utility. Before creating an ftp profi le with the camera menus, set the camera USB option to PTP and connect the WT-3. To prevent unexpected loss of power, be sure the battery is fully charged or use an optional EH-6 AC adapter. The drain on the battery can be reduced by selecting Off for the Wireless trans- mitter > Wireless LAN system option in the camera setup menu before adjusting ftp settings.

1 Turn the camera on.

2 Select Transfer mode for Wireless transmit- ter > Mode ( 34).

3 A profi le list will be displayed showing the con- nections available in transfer mode. Highlight FTP registration and press the multi selector to the right. Note a new ftp profi le can not be cre- ated if the camera already contains nine profi les; if necessary, delete a profi le using thebutton.

Firewalls

The WT-3 uses TCP ports 20 and 21 for ftp. It may be necessary to adjust fi rewall settings before connecting to a server behind a fi rewall ( 16).

Using the Menus

If the shutter-release button on the camera or WT-3 is pressed while menus are displayed, the monitor will turn off and any changes to the current profi le will be lost. Do not press the shutter-release button while editing profi les.

Editing Existing ftp Profiles

See the Menu Guide for information on using the camera menus to edit existing ftp profi les ( 35).

48

Page 56
Image 56
Nikon WT-3 Creating ftp Profiles Using the Camera Menus, Select Transfer mode for Wireless transmit- ter Mode, Firewalls