Miscellaneous
Camera
Power source

System Requirements

Before using the WT-3 or WT-3 Setup Utility CD, confi rm that your system meets the following requirements:

Model: Nikon D200 digital single-lens refl ex camera

Firmware: A and B version 2.00 (provided on supplied WT-3 Setup Utility CD)

One EN-EL3e rechargeable Li-ion battery (supplied with D200) or EH-6 AC adapter (available separately)

 

To connect to a computer: Windows XP Service Pack 1 or later (Service Pack 2 rec-

 

ommended) or Mac OS X version 10.3 or later required (Power PC G4/G5 CPUs

 

only). Connection to computers on other networks via router not supported.

OS1

To upload pictures to an ftp server: Operation has been confi rmed with Windows XP

Professional and Mac OS X version 10.3 or later. Under these operating sys-

 

 

tems, ftp servers can be confi gured using standard ftp services such as IIS (In-

 

ternet Information Services). Internet ftp connections and ftp servers running

 

third-party software are not supported.

 

Wireless: Wireless LAN access point or computer with built-in or external wire-

Network

less LAN adapter (IEEE 802.11b or 802.11g compliant).2

Ethernet: Ethernet cable and computer with built-in or external Ethernet port

 

 

(100 base-TX or 10 base-T)

 

WT-3 Setup Utility: required to copy computer profi les to camera (camera can be

confi gured for use with ftp servers using either WT-3 Setup Utility or camera menus). WT-3 Setup Utility can not be used to confi gure camera for use with optional PD-10 wireless printer adapter.

CD-ROM drive: required when installing WT-3 Setup Utility

USB: UC-E4 USB cable (included with camera) and computer with built-in USB port required when copying network profi les to camera.3

1.For the latest information on supported operating systems, see the Nikon website for your area ( 1).

2.For information on wireless network settings for Windows XP Professional and Mac OS X, see the online help for the WT-3 Setup Utility.

3.Connect the camera directly to the computer. The camera may not function as expected when connected via a hub, extension cable, or keyboard.

The PD-10 Wireless Printer Adapter

A PictBridge-compatible printer with a fl at (type A) USB connector is required for connection to the PD-10. A computer is not required.

Multiple Transmitters

Simultaneous use of multiple WT-3 wireless transmitters with a single host may produce un- expected results. Do not attempt to use more than one WT-3 per host.

3

Page 11
Image 11
Nikon WT-3 user manual System Requirements, PD-10 Wireless Printer Adapter, Multiple Transmitters