Setup

Follow the steps below to prepare the WT-3 for use:

Update the camera firmware : The WT-3 is supported from camera fi rmware A version 2.00 and B version 2.00. Users of earlier versions will need to update the camera fi rmware as described in the fi rmware update manual on the supplied WT-3 Setup Utility CD.

Copy network profiles to the camera: Users of Windows XP Service Pack 1 or later or Mac OS X version 10.3 or later can copy computer or printer profi les to the camera using the supplied WT-3 Setup Utility. Skip this step when using the camera rather than a computer to adjust settings for connection to an ftp server in transfer mode ( 48).

Install the WT-3 Setup Utility ( 7)

Copy network profiles to the camera ( 11)

Connect the WT-3 ( 18)

Insert the battery (20)

After setting up the WT-3 as described on the following pages, proceed to “Upload- ing Images: Transfer Mode” (21), “Controlling the Camera: PC Mode” (26), or “Printing Pictures: Print Mode” ( 30).

Updating the Camera Firmware

The WT-3 is supported from camera fi rmware A version 2.00 and B version 2.00. Display the camera fi rmware version as described in the camera manual. If earlier versions are installed, update the camera fi rmware as described in the fi rmware update manual on the supplied WT-3 Setup Utility CD.

To display the fi rmware update manual, start the Install Center as described in Steps 1–3 of “Install the WT-3 Setup Utility” on page 7 (Windows) or 9 (Macintosh) and click D200 Firmware to display the “D200 Firm- ware” folder. Double-clicking INDEX.pdf displays a list

of languages; click a language to display the update

manual (Adobe Reader or Adobe Acrobat Reader 4.0 D200 Firmware or later required).

Additional Updates

Once the camera fi rmware has been updated for use with the WT-3 as described above, all subsequent updates should be performed with the WT-3 connected ( 18) and Off selected for Wireless transmitter > Wireless LAN system ( 34).

6

Page 14
Image 14
Nikon user manual Follow the steps below to prepare the WT-3 for use, Updating the Camera Firmware, Additional Updates