Nikon WT-3 user manual Inserting the Battery, Insert the battery as shown on the inside of the

Turn the camera off and rotate the control lock on the WT-3 to the L position.

Inserting the Battery

To power the camera when the WT-3 is in place, insert the camera battery into the WT-3 battery chamber. The WT-3 takes one EN-EL3e rechargeable Li-ion battery; other batteries can not be used. Note that the drain on the battery is increased when the WT-3 is attached.

1

2 Open the battery chamber cover.
Insert the battery as shown on the inside of the	Batery latch
3 battery chamber cover. The battery latch will slide
aside during insertion and pop up to lock the bat-
tery in place when fully inserted.
Close the battery-chamber cover. Make sure the
4 cover is properly latched. The latch will click into
place when the cover is fully closed.
Turn the camera on and check the battery level in
5 the control panel or viewfi nder or using the Bat-
tery Info option in the camera setup menu.
Removing the Battery
Being careful not to drop the battery, open the battery cham-
ber cover and remove the battery as shown at right.

The EH-6 AC Adapter

The optional EH-6 AC adapter can also be used to power the camera when the WT-3 is connected. Connect the DC plug on the AC adapter to the WT-3 DC-IN connector, not to the camera.

20