Manuals / Nikon / Computer Equipment / Network Card

Nikon WT-3 user manual Controlling the Camera Using Nikon Capture

Models: WT-3

1 65
Download 65 pages 53.18 Kb
Page 36
Image 36
Controlling the Camera Using Nikon Capture 4

Controlling the Camera Using Nikon Capture 4

1

2

Complete the steps in “Connecting to a Computer” (Complete the steps in “Connecting to a Computer” ( 26). 26).

Start Nikon Capture 4 Camera Control on the host computer and confi rm thatManual backgroundManual backgroundis displayed in the camera control panel.

3 Control the camera as described in the Nikon Capture 4 User’s Manual. Any photographs taken while the camera is connected will be recorded directly to the computer hard disk.

Ethernet Networks: Do Not Disconnect the Ethernet Cable

Do not disconnect the Ethernet cable while the camera is on.

Manual background Wireless Networks: Loss of Signal During Transfer

A loss of signal may interrupt the connection while pictures are being transferred to Nikon Capture 4 Camera Control. If the POWER LED on the WT-3 is blinking (Manual background 29), select Off for the Wireless transmitter > Wireless LAN system option in the camera setup menu and then select On again. Transfer will resume when the connection is re-established. Do not turn the camera off. Transfer can not be resumed once the camera is turned off.

28

Page 35 Page 37
Page 36
Image 36
Nikon WT-3 user manual Controlling the Camera Using Nikon Capture, Complete the steps in “Connecting to a Computer”
Page 35 Page 37