Copying Network Profiles to the Camera

Profi les for network computers, ftp servers, and printers can be copied to the cam- era using the WT-3 Setup Utility. The WT-3 Setup Utility is required for connection to a computer in transfer, PC, and print modes. Either the WT-3 Setup Utility or the camera menus ( 48) can be used for connection to ftp servers in transfer mode.

Supported Operating Systems

The WT-3 Setup Utility is compatible with Mac OS X version 10.3 or later (Power PC G4/G5 CPUs only) or a pre-installed version of Windows XP Service Pack 1 or later (Service Pack 2 recommended).

Before starting the WT-3 Setup Utility, ensure that the camera battery is fully charged or the optional EH-6 AC adapter is connected.

1

2

Set the camera USB option to PTP.

1.1 Turn the camera on.

1.2Select the USB in the camera setup menu and choose PTP.

Connect the UC-E4 USB cable supplied with the camera.

2.1 Turn the camera off.

2.2 Connect the UC-E4 as shown at right.

Connecting the USB Cable

The USB cable can also be connected when the WT-3 is attached. Disconnect the WT-3 USB cable and connect the UC-E4 to the camera as described above.

11

Page 19
Image 19
Nikon WT-3 user manual Copying Network Profiles to the Camera, Connecting the USB Cable