Nikon WT-3 Choose from the following options, Enter wireless network settings and click Next

8 Choose from the following options.

•Automatic setup (recommended): If more than one network adapter is available, choose an adapter from the pull-down menu (if Ethernet only is selected in Step 7, the menu will list Ethernet adapters only). Click Next. If Ethernet and Wireless was selected in Step 7 and the com- puter is confi gured for use with an existing in-

frastructure network, you will be prompted either to choose an existing infrastructure network or to set up a new ad-hoc network for use with the camera; select the desired option and click Next. If FTP server was se- lected in Step 7, proceed to Step 11. Otherwise proceed to Step 12.

•Manual setup (for advanced users): To adjust settings manually, select this option and click Next. If Ethernet and Wireless was selected in Step 7, proceed to Step 9. Otherwise proceed to Step 10.

9	Enter wireless network settings and click Next.
	• Network name (SSID): Enter a network name or choose
	from a list of existing networks (	36). Do not change
	the name if it is supplied automatically.
	• Network type: Infrastructure or ad-hoc (		36).
	• Channel (ad-hoc networks only): Choose the channel
	(1–13) used by the host. If channel 12 or 13 is selected
	for the WT-3A, channel 11 will be used instead.
	• Authentication: Choose the type of authentication used
	by the computer or access point. The camera supports WPA-PSK, WPA2-PSK, open
	system, and shared key authentication. WPA-PSK and WPA2-PSK are available only in
	infrastructure mode.
	• Encryption: Choose the type of encryption used on the network. Depending on the
	authentication used, the following types of encryption are available:
	Open: none, 64-bit WEP, 128-bit WEP		Shared: 64-bit WEP, 128-bit WEP
	WPA-PSK: TKIP, AES		WPA2-PSK: AES

• Encryption key: If the network uses encryption, enter the network key. The number of

the characters required depends on the type of encryption used:
	WEP (64-bit)	WEP (128-bit)	TKIP, AES
Number of characters (ASCII)	5	13	8–63
Number of characters (hexadecimal)	10	26	64

•Key index: In infrastructure networks that use WEP encryption, enter the host or access point key index. The default index is 1.

14