Troubleshooting
One day your dryer seems not to be working. Before you call your Service Centre (see Service), go through the following troubleshooting suggestions:
Problem: | Possible causes / Solution: | |
The dryer won’t start. | ● | The plug is not plugged into the socket, or not making contact. |
| ● | There has been a power failure. |
| ● | The fuse has blown. Try to plug another appliance into the socket. |
| ● | You are using an extension cord? Try to plug the dryer’s power cord |
|
| directly into the socket. |
| ● | The TIMER knob has not been set properly (see Start and Programmes). |
| ● | The START button has not been pressed (see Start and Programmes). |
| ● | The START button was pressed with the door open. Make sure the door is |
|
| closed before pressing the START button (see Start and Programmes). |
|
| ! If the START button is pressed with the door open the dryer will not |
|
| start. Close the door, wait for a few seconds and then press the START |
|
| button again (see Start and Programmes). |
It is taking a long time to dry. | ● | The filter has not been cleaned (see Maintenance). |
| ● | The temperature setting is not ideal for the type of fabric you are drying |
|
| (see Start and Programmes). |
| ● | The correct programme has not been selected for the load (see Start |
|
| and Programmes). |
| ● | The flexible vent tube is obstructed (see Installation). |
| ● | The air intake vent is obstructed (see Installation). |
| ● | The permanent ventilation flap on the storm cover is obstructed (see |
|
| Installation). |
| ● | The items were too wet (see Laundry). |
| ● | The dryer was overloaded (see Laundry). |
GB
Information | Important |
|
|
Installation |
|
|
|
Description |
|
|
|
Programmes | Start and |
|
|
Laundry |
|
|
|
Suggestions | Warnings and |
|
|
and Care | Maintenance |
Troubleshooting |
|
Service |
|
11
