48965 Rev 1 13/4/04 3:47 PM Page 7
Wall mounting
The charging stand can be wall mounted or free standing. To wall mount find a suitable position on the wall away from concealed pipes and electricity cables.
Use the stand with blender in place to determine the position most suitable, mark a line on the wall across the top of the charger stand. From this line mark a horizontal line 15mm below, now mark 2 holes 40mm apart. I
Using wall plugs and screws provided, fix so screw heads are 5mm from the surface. Hang the charger base and adjust the depth position of the screws if required to improve the fit.
Tips for blending
When processing foods with strong colour (eg. carrots) the plastic parts of the appliance may become discoloured. Use cooking oil to clean any discoloured parts. Permanent discolouration may happen, this is acceptable.
Trouble shooting
•If the blender is not charging, red or green light is not illuminated on charger. Check the following:
•The charger adaptor · is fitted into the charging socket fi.
•The motor body is correctly located on the blender base unit.
I |
Template Not to scale |
7 |
