Drainage Connection, Electrical connections

Installation

Drainage Connection

!Although you may need to move the hooked end support along the grey drainage hose, DO NOT remove it.

!Whichever drainage method you use, make sure that the hooked end support is fixed level to, or above the ‘Plumbing Indicator Line’ (see Description page 2).

Electrical connections

Before plugging the appliance into the mains socket, make sure that:

●	the socket is earthed and in compliance with the
	applicable law.
●	the socket is able to sustain the appliances
	maximum power load indicated in the Technical
	Details table (see page 20).
●	the supply voltage is included within the values

We recommend one of the following:

Standpipe method:

1.Make sure the standpipe height is a minimum 500mm up to a maximum 1200mm from the floor.

2.Insert the drainage hose approximately 100mm into the standpipe.

Under sink method:

Hooked end support

minimum:

500mm

maximum:

1200mm

indicated in the Technical Details table (see page 20).

● the socket is compatible with the machines plug.

If this is not the case, replace the socket or the

plug, ensuring a 13A fuse is fitted.

! The machine should not be installed in an outdoor

environment, not even when the area is sheltered,

because it may be very dangerous to leave it exposed

to rain and thunderstorms.

! When the machine is installed, the mains socket

must be within easy reach and should be connected to

a suitable electrical supply.

! Do not use extensions or multiple sockets.

1.Cut off the blocked end of the under sink drainage unit, or remove the blanking plug if fitted.

2. Fix the hooked end support a
minimum of 800mm from the
floor.
3. Use a hose clip (eg. a jubilee
		Hose clip
		Hose clip
clip) to securely attach the grey		minimum:
drainage hose end to the under		800mm
drainage hose end to the under		from floor
sink drainage unit.

! The power supply cable must never be bent or

dangerously compressed.

! The power supply cable must only be replaced by an

authorised serviceman.

! The company denies all liability if and when these

standards are not respected.

Before you start using your machine

The first wash cycle

Once the appliance has been installed and before you use it for the first time, run a wash cycle without detergent and no laundry. This will check your installation, connections and drainage and will thoroughly clean the interior before you carry out an actual wash programme on your laundry.

This will take approximately 21/2 hours to complete.

!Run the 95˚ White Cotton programme 'B', without laundry and without detergent.

!During this cycle check for any leaks from under the machine. If present ensure all hoses are securely tightened.

Did you know?...

●...it is very important to ensure that your hoses or cables are not kinked or squashed as this can lead to your machine failing to fill or empty the water.

●...it is very important to respect the dimensions given within the drainage connection methods (see above).

●...if using the undersink drainage method remember to cut off the blocked end, or remove the blanking plug.

●...you will be charged for a service engineers visit if a problem with your machine is caused by incorrect installation or misuse.

WD645, WD440, WD640, WD420 specifications

The Hotpoint WD420, WD640, WD440, and WD645 are an impressive range of washer-dryers designed to meet the diverse needs of modern households. Each model is characterized by its combination of efficient washing and drying capabilities, making them ideal for those who value convenience without sacrificing performance.

The Hotpoint WD420, known for its compact design, is perfect for smaller living spaces. It boasts a 6 kg washing capacity and a 5 kg drying capacity, making it sufficient for individuals or small families. Its 1200 rpm spin speed ensures efficient water extraction, reducing drying time significantly. This model features the ‘Anti-Ageing’ program, which uses lower temperature washes and spins to help protect delicate fabrics, prolonging their lifespan.

In contrast, the WD640 offers a more extensive capacity, with a 7 kg washing and a 5 kg drying capability. This model introduces advanced features such as the ‘Rapid Wash’ program, which allows users to wash small loads in just 30 minutes - ideal for those busy days when time is of the essence. It also includes a sensor drying function, which adjusts the drying time based on the moisture levels in the drum, ensuring energy efficiency and protecting clothes from overdrying.

The WD440 enhances the drying experience with its 6 kg washing and 5 kg drying capacities. A notable characteristic of this model is its ‘Cotton’ cycle, designed specifically to handle cotton fabrics like shirts and bed linens, providing optimal cleaning and drying. Additionally, the model includes a delay timer, allowing users to set the appliance to start at their convenience, a great feature for balancing busy schedules.

Finally, the WD645 epitomizes versatility, featuring a larger washing capacity of 8 kg and a drying capacity of 6 kg. It comes equipped with Smart Technology, which utilizes sensors to monitor load size and optimize wash cycles for the best performance. The model also features a special ‘Wool’ cycle, ensuring that woolen items are washed gently, thus preventing any shrinkage or damage.

Together, these Hotpoint washer-dryer models combine innovative technologies with user-friendly features such as various wash programs, energy efficiency, and compact designs. They truly cater to the needs of contemporary life, making laundry tasks simpler and more efficient, benefiting households of all sizes and lifestyles.

Hotpoint WD640 Drainage Connection, Electrical connections, Before you start using your machine

Models: WD645 WD440 WD640 WD420