Installation Overview

The installation procedure includes the following major steps:

1.Prepare to install the adapter.

2.Shut down the operating system and switch off the power to the computer.

3.Install the adapter.

4.Attach the adapter to the network.

5.Configure the adapter.

6.Verify operation.

Product Description

The HP-PB 100VG-AnyLAN Network Adapter provides the hardware needed to interface an HP-PB backplane to a 100VG-AnyLAN Network.

The HP-PB 100VG-AnyLAN Network Adapter has the following features:

•one built-in connector: an RJ-45 connector, for attachment to the hub

•10 or 100-Mbit per second operation

•single-high form factor

Product Contents

•HP-PB 100VG-AnyLAN Network Adapter — A3496-60001

•Installation and Service Manual — B5426-90001

Tools and Accessories

Before installation, gather these tools and accessories:

•screwdrivers necessary for opening your computer and installing adapters

•grounding wrist strap

•cable for attachment to hub, UTP category 3 or 5

10