WARNING

Installation Procedure

2.Shut Down the Operating System and Switch Off the Computer

2.Shut Down the Operating System and Switch Off the Computer

1.Before installing the HP-PB 100VG-AnyLAN Network Adapter, ensure that the operating system is shut down. Refer to your computer system manuals for proper shutdown procedures to avoid corruption or loss of data.

2.Ensure that power to the host computer is switched off and disconnected from the source power supply.

Unless otherwise noted in your computer system manuals, failure to properly shut down the system and remove power may create a personnel hazard, or may result in hardware damage or data corruption.

Chapter 1

17