Service Information

Removal/Replacement Instructions

Removal/Replacement of the Adapter

For adapter removal, follow the procedures below:

1.Before removing the card, ensure that the operating system is shut down and power to the host computer is switched off. Consult your computer documentation for proper shutdown procedures to avoid file corruption or loss of data.

2.Disconnect all cabling from the adapter.

3.Consult your computer documentation for instructions on the best method for accessing the adapter slots.

4.Unscrew the two retaining screws and pull extractor levers out.

5.While holding extractor levers, slide the adapter out of its slot.

6.Place adapter in an antistatic bag.

7.Install a slot cover for proper cooling and RFI suppression.

To install a replacement adapter, follow the procedures described in the installation section.

28

Chapter 2