HP 11793A Temperature, Humidity, Altitude, Humidity, Altitude, has, 5°C, FRAGILE, 18. Packaging, Other Packaging, Mounting Options, 16. Rack Mounting, Original Packaging

Microwave Converter Model 11793A

14. Operating Environment

The operating environment should be within the following limitations:

Temperature ..........................	0°C to +55"C
Humidity ..............................	~ 9 5 relative% at 40°C
Altitude ...............................	44570 meters (1 5 000 feet)

15. Bench Operation

The instrument cabinet has plastic feet which are shaped to insure self-alignment when stacked in a system configuration.

16. Rack Mounting

Rack mounting information is provided with the rack mounting kits. If the kits were not ordered with the

instrument as options, they may be ordered through the nearest Hewlett-Packard office. Refer to Paragraph 6, under "Mechanical Options"for kit information. See Figure 2, Rack Mounting Options.

17.Storage and Shipment

The instrument should be stored in a clean, dry environment. The following environmental limitations apply to both storage and shipment.

Temperature (Standard) .......................	-55°Cto +7S"C
Temperature (Options 001, 01 1, and 021) ....	-25°C to +7S"C
Humidity ......................................	4 9 5% relative
Altitude .......................................	15 300 meters (SO 000 feet)

18. Packaging

Original Packaging. Containers and materials identical to those used in factory packaging are available through Hewlett -Packard offices. If the instrument is being returned to Hewlett -Packard for servicing; attach a tag indicating the type of service required, return address, model number, and full serial number. Also, mark the container FRAGILE to ensure careful handling. In any correspondence refer to the instrument by model number and full serial number.

Other Packaging. The following general instructions should be used for repackaging the instrument with commercially available materials.

a.Wrap the instrument in heavy paper or plastic. (If shipping to a Hewlett-Packard office or service center, attach a tag indicating the type of service required, return address, model number, and full serial number.)

b.Use a strong shipping container. A double-wall carton made of 2.4 MPa (350 psi) test material is adequate.

8