Microwave Converter

Model 1179 3A

7.Attach the mixer assembly to the module base, but do not tighten the screws.

8.Tighten the connection to AT 1, then tighten the Mixer assembly screws.

9.Connect W 1 (in Standard instruments), W 19 (in Option 010 instruments), or W 17 (in Option 020 instruments) to the right port of the mixer (cable slots in module should be facing assembler). Ensure that the radio frequency interference (RFI) shielding grommet cradles the cable in the slot with the cable access slit facing to the side.

10.Connect W2 to S2, port #3. Ensure that the RFI Grommet is in place as above in step 9.

11.Repeat step 10 for W3 to S2, port #2.

12.Attach U2 to the module cover.

13.Solder the orange wire to the U 2 amplifier terminal.

14.Place filter clamp around FL1 and attach loosely to the cover.

15.Connect FL 1 to U2. Tighten FL 1 clamp.

16.Connect W7 to U3 and FL1.

17.Connect W8 to U2 and S2, port #4.

18.Secure module cover to base. Snug the screws down finger tight, then tighten the screws, working from the center out.

19.Connect W12 to AlJ1.

42.RF Module Assembly Procedure for Option 001, 011, & 021 Instruments

1.For Spira Shield (RF gasket) replacement, refer to step 1 under Paragraph 41 above.

2.Wrap and solder the control wires to the S1 and S2 terminals as follows: blue to SI terminal 1, yellow to S1 terminal 2, white/red to S1 terminal C(+);

green to S2 terminal 1, brown to S2 terminal 2, orange, white/red to S2 terminal C(+).

3.With the cable slots of MP 14 RF module facing towards the assembler, mount S1 (label up and the ports pointing to the center of the module) in the right side of the module base; mount S2 in the left side of the module base. Secure the switches with the four long Torxhead screws.

4.Connect AT1 to S2, port #I.

5.Connect U3 to the mixer bracket, ensuring that the mixer side port (which connects to the IF output) faces opposite to the bracket mounting holes.

6.Connect U3 to ATI, but do not tighten.

34

Page 43 Page 45
Page 44
Image 44
HP 11793A manual
Page 43 Page 45

11793A specifications

The HP 11793A is a precision electronic component designed for high-frequency signal processing and transmission, primarily used in laboratory and industrial applications. This device exemplifies HP's longstanding commitment to quality and innovation in the world of electronic instrumentation.

One of the notable features of the HP 11793A is its ability to handle a wide frequency range, making it suitable for a variety of tasks, including signal analysis, modulation, and demodulation. This versatility is complemented by its excellent linearity and low distortion, which are critical factors for applications that require high accuracy and reliability in signal representation.

The HP 11793A employs advanced technologies that enhance its performance and usability. One of the key technologies is its robust signal conditioning capabilities, which allow it to filter and amplify signals effectively. This ensures that even weak signals can be accurately processed, significantly improving measurement reliability. Furthermore, the device uses cutting-edge materials and manufacturing processes to minimize noise and interference, paving the way for clearer and more precise signal outputs.

Another significant aspect of the HP 11793A is its user-friendly interface. Designed with the operator in mind, the device features intuitive controls and a well-organized display, enabling quick adjustments and easy monitoring of parameters. This ergonomic design is particularly beneficial in high-pressure environments where time is crucial, allowing technicians and engineers to focus on their tasks without being bogged down by complicated procedures.

Reliability is paramount in any electronic component, and the HP 11793A does not disappoint. Built to withstand rigorous testing and prolonged usage, it boasts a durable construction that ensures longevity. The device also adheres to strict safety and performance standards, providing users with peace of mind.

In conclusion, the HP 11793A combines high-frequency signal processing capabilities, advanced signal conditioning technologies, user-friendly design, and robust reliability. These features make it an essential tool for professionals in the fields of electronics, telecommunications, and research laboratories, contributing to a more efficient and effective workflow in high-precision tasks. Whether for development, testing, or analysis, the HP 11793A stands out as a notable choice in the realm of electronic instrumentation.
Top Page Image Contents