Processor fan/heat sink assembly

Description

Spare part number

 

 

Processor fan/heat sink assembly (includes replacement thermal material)

616583-001

 

 

Before removing the processor fan/heat sink assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 36).

5.Remove the memory module compartment cover (see “Expansion memory module” on page 4–8).

6.Remove the top cover (see Top cover on page 39

Remove the processor fan/heat sink assembly:

1.Disconnect the fan cable (1) from the system board.

2.Following the 1, 2, 3, 4 sequence stamped into the processor fan/heat sink assembly, loosen the four Phillips PM2.0×6.0 captive screws (2) that secure the processor fan/heat sink assembly to the system board.

3.Remove the Phillips PM2.0×3.0 screw (3) that secures the processor fan/heat sink assembly to the system board.

Component replacement procedures 51