13.Remove the two Phillips PM2.0×3.0 screws 1 that secure the wireless antenna transceivers to the display enclosure.

a.Remove the two Phillips PM2.0×3.0 screws (1) that secure the wireless antenna transceivers to the display enclosure.

b.Release the wireless antenna cables from the routing channel (2) built into the right side of the display enclosure.

c.Remove the wireless antenna transceivers and cables (3). The wireless antenna transceivers and cables are available using spare part number 576814-001.

Reverse this procedure to install the display assembly.

68 Chapter 4 Removal and replacement procedures