8.If it is necessary to replace the display hinges:

a.Remove the four Phillips PM2.5×6.0 screws (1) that secure the display hinges to the display enclosure.

b.Remove the display hinges (2). The display hinges are included in the Display Hinge Kit, spare part number 576809-001.

9.If it is necessary to replace the display panel:

a.Remove the four Phillips PM2.0×4.0 screws (1) that secure the display panel to the display enclosure.

b.Release the display panel cable (2) from the clips and routing channel built into the display enclosure.

c.Remove the display panel (3). The display panel is available using the following spare part numbers:

●591327-001—For use only with the 15.6-in, WVA, AntiGlare LED display assembly

●602479-001—For use only with the 15.6-in, WVA, BrightView LED display assembly

●602478-001—For use only with the 15.6-in, SVA, BrightView LED display assembly

Component replacement procedures 65