2.Detach the power button board cable (2) and power button board (3) from the base enclosure. (The power button board cable and power button board are attached to the base enclosure with double-sided tape.)

Reverse this procedure to install the power switch board.

Power connector cable

Description

Spare part number

 

 

Power connector cable (includes bracket)

576846-001

 

 

Before removing the power connector cable, follow these steps:

1.Shut down the computer.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 36

5.Remove the following components:

a.Memory module compartment cover (see “Expansion memory module”).

b.Top cover (see Top cover on page 39

c.Processor fan/heat sink assembly (see Processor fan/heat sink assembly on page 51

56 Chapter 4 Removal and replacement procedures