System Configuration Menu
Select | To do this | |
|
| |
Language Support | Change the Setup Utility language. | |
|
| |
Processor C4 State | Enable/disable the processor C4 standby state. | |
|
| |
Boot Options | Set the following boot options: | |
| ● f10 and f12 Delay (sec.)―Set the delay for the f10 and | |
| f12 functions of Setup Utility in intervals of 5 seconds | |
| each (0, 5, 10, 15, 20). | |
| ● HP QuickWeb―Enable/disable the QuickWeb Boot | |
| menu in Setup Utility. | |
| ● Internal Network Adapter boot―Enable/disable boot | |
| from Internal Network Adapter. | |
| ● Boot Device Priority―Set the boot device priority for: | |
| ◦ | Internal hard drive (select models only) |
| ◦ | USB Floppy |
| ◦ | USB CD/DVD ROM Drive |
| ◦ | USB flash drive |
| ◦ | USB Hard drive |
| ◦ | USB Card Reader |
| ◦ | Network adapter |
|
| NOTE: Only the devices attached to the system |
|
| will appear in the boot order menu. |
|
|
|
Diagnostics Menu
Select | To do this |
|
|
Hard Disk Self Test (select models only) | Run a comprehensive |
|
|
Memory Test | Run a diagnostic test on the system memory. |
|
|
74 Chapter 5 Setup Utility