13. Disconnect the backlight cable (2) and the display panel cable (3) from the display inverter.
14. Remove the display inverter from the display enclosure. The display inverter is available using spare part number
15. If it is necessary to replace the display hinges, remove the six Torx T8M2.5×5.0 screws (1) that secure the display panel to the display enclosure.
16. Remove the display panel (2) from the display enclosure.
17. Remove the two Phillips PM2.0×4.0 screws (1) that secure the display hinges to the display panel.
54 Chapter 4 Removal and replacement procedures
