Microphone

NOTE: The microphone is included in the Cables Kit, spare part number 454008-001. See Cable Kit on page 21 for more Cable Kit information.

Before removing the microphone, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 37).

5. Remove the following components:

a. Hard drive (see Hard drive on page 38)

b. Optical drive (see Optical drive on page 45)

c. Keyboard (see Keyboard on page 47)

d. Switch cover (see Switch cover on page 49)

e. Display assembly (see Display assembly on page 51)

f. Top cover (see Top cover on page 55)

g. Bluetooth module (see Bluetooth module on page 61)

Remove the microphone:

1. Disconnect the microphone cable (1) from the system board.

2. Remove the microphone receiver (2) from the clip built into the base enclosure.

64 Chapter 4 Removal and replacement procedures