3. Remove the front LED board (3).
Reverse this procedure to reassemble and install the front LED board.
Bluetooth module
NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cables Kit, spare part number
on page 21 for more Cable Kit information.
Description | Spare part number |
|
|
Bluetooth |
|
|
|
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 37).
5. Remove the following components:
a. Hard drive (see Hard drive on page 38)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 47)
d. Switch cover (see Switch cover on page 49)
Component replacement procedures 61
