Routing the Cables

Before connecting the cables, route them through the cable routing hole in the center of the stand. Figure 3-3Routing Cables

Connecting the Cables

CAUTION: Before connecting cables to the monitor, ensure that the computer and the monitor are powered off.

Connecting the VGA (Analog) Video Cable (HP 2310ti Model Only)

For analog operation, connect one end of a VGA signal cable (sold separately) to the VGA connector on the rear of the monitor and the other end to the VGA connector on the computer.

Figure 3-4Connecting the VGA Cable

6 Chapter 3 Setting Up the Monitor

ENWW