Table 4-3OSD Menu (continued)

Icon

Main Menu

Submenu

Description

 

 

 

 

 

 

Clock

Minimizes any vertical bars or strips visible on the

 

 

 

screen background (VGA input only). Adjusting the

 

 

 

Clock will also change the horizontal screen image.

 

 

 

 

 

 

Clock Phase

Adjusts the focus of the display (VGA input only).

 

 

 

This adjustment allows you to remove any horizontal

 

 

 

noise and clear or sharpen the image of characters.

 

 

 

 

 

 

Horizontal Position

Adjusts the position of the screen image left and right

 

 

 

(VGA input only).

 

 

 

 

 

 

Vertical Position

Adjusts the position of the screen image up and

 

 

 

down (VGA input only).

 

 

 

 

 

 

Custom Scaling

Selects the method on how displayed information on

 

 

 

the monitor will be formatted. Select:

 

 

 

Fill to Screen - image fills the entire screen and

 

 

 

 

may look distorted or elongated because of

 

 

 

 

non-proportional scaling of height and width

 

 

 

Fill to Aspect Ratio - image is sized to fit the

 

 

 

 

screen and maintains proportional image

 

 

 

 

 

 

Sharpness

Adjusts the screen image to look sharper or soft.

 

 

 

 

 

 

Video Overdrive

Turns Video Overdrive On or Off. The factory default

 

 

 

is Off.

 

 

 

 

 

 

Dynamic Contrast

Turns Dynamic Contrast Ratio (DCR) On or Off. The

 

 

Ratio

factory default is Off.

 

 

 

 

 

OSD Control

 

Provides a menu for adjusting the on-screen display

 

 

 

(OSD) controls.

 

 

 

 

 

 

Horizontal OSD

Changes the viewing position of the OSD menu to

 

 

Position

the left or right area of the screen. The factory default

 

 

 

range is 50.

 

 

 

 

 

 

Vertical OSD Position

Changes the viewing position of the OSD menu to

 

 

 

the top or bottom area of the screen. The factory

 

 

 

default range is 50.

 

 

 

 

 

 

OSD Transparency

Adjust to view the background information through

 

 

 

the OSD.

 

 

 

 

 

 

OSD Timeout

Sets the time duration in seconds that the OSD is

 

 

 

visible after the last button is pressed. The range is 5

 

 

 

– 60 seconds. The factory default is 30 seconds.

 

 

 

 

 

Management

 

Selects the OSD and power management features of

 

 

 

the monitor.

 

 

 

 

 

 

Power Saver

Enables the power saving feature. Select:

 

 

 

On

 

 

 

Off

The factory default is On.

ENWW

Adjusting the Monitor Settings 23

Page 31
Image 31
HP 2310TI manual 3OSD Menu