16.Remove the display panel (2).
17.Remove the two Phillips PM2.0×4.0 screws (1) that secure each display hinge to the display panel.
18.Remove the display hinges (2). The left and right display hinges are available using spare part number
19.If it is necessary to replace the display panel cable, turn the display panel upside down, with the display panel bottom edge toward you.
20.Remove the support tape (1) that secures the top edge of the display panel cable to the display panel.
21.Disconnect the display panel cable (2) from the display panel.
22.Disconnect the display panel cable (3) from the display inverter.
Component replacement procedures 51