23.Remove the display panel cable (4). The display panel cable is available using spare part number
Reverse this procedure to reassemble and install the display assembly.
Top cover
Description | Spare part number |
|
|
Top cover | |
|
|
Before removing the top cover, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 30).
5.Remove the following components:
a.Flash drive (see Flash drive on page 36)
b.Optical drive (see Optical drive on page 38)
c.Switch cover and keyboard (see Switch cover and keyboard on page 40)
d.Display assembly (see Display assembly on page 47)
Remove the top cover:
1.Turn the computer upside down, with the front toward you.
2.Loosen the captive Phillips PM2.5×6.0 screw (1) that secures the Bluetooth module compartment cover to the computer.
52 Chapter 4 Removal and replacement procedures