3.Remove the wedge-shaped screw covers (1) and the four Torx T8M2.0×5.0 screws (2) that secure the display assembly to the computer.

NOTE: The rubber screw covers are available in the Rubber Kit, spare part number 481106-001.

4.Turn the computer right-side up, with the front toward you.

5.Open the computer.

6.Remove the Torx8 T8M2.5×6.0 screw (1) that secures the display panel cable ground loop to the left hinge.

7.Disconnect the display panel cable (2) from the system board.

8.Remove the wireless antenna cables (3) from the clips and routing channels (4) built into the top cover.

48 Chapter 4 Removal and replacement procedures