LED board

Description

Spare part number

 

 

LED board (includes cable and Mylar cover)

481090-001

 

 

Before removing the LED board, follow these steps:

1.Shut down the computer.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 30).

5.Remove the following components:

a.Flash drive (see Flash drive on page 36)

b.Optical drive (see Optical drive on page 38)

c.Switch cover and keyboard (see Switch cover and keyboard on page 40)

d.Display assembly (see Display assembly on page 47)

e.Bluetooth module compartment cover (see Top cover on page 52)

f.Top cover (see Top cover on page 52)

Remove the LED board:

1.Release the ZIF connector (1) to which the LED board cable is attached and disconnect the LED board cable (2) from the system board.

2.Remove the LED board (3) from the clip in the base enclosure.

NOTE: The LED board cable is included with the LED board and is also available in the Cables Kit, spare part number 481092-001.

Component replacement procedures 55