HP 263924-002 OK, OK, Add, Exit, Browse, GET Access, PUT Access, Customize Settings, Use Default Settings, Secure TFTP Directory

Upgrading Firmware using TFTP

2.You can use the default settings for the directory with the GET access or

PUT access rights set as indicated in the following procedure. To use the default settings, select Use Default Settings, then click Exit.

To customize settings, select Customize Settings.

a.To add directories, click Add. The Secure TFTP Directory dialog box is displayed.

b.Enter the path name of the directory, or click Browse, select a directory, and then click OK.

c.To enable GET access or PUT access to that directory, select the GET Access or the PUT Access checkbox.

d.Click OK. The added directory is displayed in the list.

Figure 7-2: Secure TFTP Directory dialog box

HP IP Console Switch User Guide 7-5