Installing the IP Console Switch

10.Position the front cover panel, and secure it to the front of the rack, using one screw on each side.

100-240V

,

1.0A, 50/60 Hz

 

 

2A,

AC

CAUTION:

 

 

Figure 2-15: Positioning the front cover panel

Configuring the IP Console Switch Hardware

To configure the IP Console Switch hardware:

1.Connect one end of a serial cable to an available COM port on the server that is to be viewed locally from the IP Console Switch.

2.Connect the other end of the serial cable to the serial port on the IP Console Switch.

3.Plug the supplied power cord in to the rear of the IP Console Switch and then in to a valid power source.

4.Power on the IP Console Switch. The activity indicator on the rear panel powers on. The activity indicator blinks for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the Enter key to access the main menu.

2-14

HP IP Console Switch User Guide