Expansion Module

Installing the Expansion Module into the IP Console Switch System

To install an optional Expansion Module into the IP Console Switch system:

1.Mount the Expansion Module into the rack, using one of the previously described methods.

2.Locate up to nine UTP CAT5 cables.

3.Connect one end of a UTP CAT5 cable to the desired port on the rear panel of the IP Console Switch.

4.Attach the other end of the UTP CAT5 cable to the IN port on the Expansion Module.

5.Connect one end of another UTP CAT5 cable to the OUT port on the Expansion Module.

6.Attach the other end of the second UTP CAT5 cable to the Interface Adapter.

7.Repeat steps 5 through 6 to connect any other servers.

3-8

HP IP Console Switch User Guide