Local Port Operation

Broadcasting Selected Servers

To broadcast selected servers:

1.From the Broadcast dialog box, select the keyboard and mouse checkboxes for the servers that are to receive the broadcast commands.

-or-

Press the Up or Down Arrow keys to move the cursor to the target server. Then press the Alt + K keys to select the keyboard checkbox and/or the Alt + M keys to select the mouse checkbox. Repeat for additional servers.

2.Click OK to save the settings and return to the Setup dialog box. Click X or press the Esc key to return to the Main dialog box.

3.From the Commands menu, select the Broadcast Enable checkbox to activate broadcasting.

4.From the user station, enter the information and/or perform the mouse movements you want to broadcast.

Activating Broadcasting

To activate or deactivate broadcasting, from the Commands menu, select or deselect the Broadcast Enable checkbox.

Setting up a Scan Pattern

In Scan mode, the console switch automatically scans port to port (server to server). You can select up to 16 servers from a list of all servers attached to your unit. You can display the list by either server name or EID number by clicking the appropriate button. Selecting the checkbox beside each server to be added to the scan list creates the scan list. The creation of a scan list does not start Scan mode. You must enable Scan mode through the Scan Enable checkbox on the Commands dialog box.

6-22

HP IP Console Switch User Guide