•If ÷R is part of a series of multiple statements, only the quotient will be transferred to the next operation.

Example: (2)  (10+2)

•The operation buttons  are disabled during display of the result of an operation with calculation and display of remainder.

•If one of the following conditions is present when performing an operation with calculation will be treated as a normal division without calculation or display of remainder.

A.When the dividend is greater than 1 ✕ 1010.

B.When the quotient is not a positive value or the remainder is not an entire positive or a positive fraction.

Example: is calculated as: -5 ÷ 2. Example:



Fraction Simplification Function

•This function simplifies a fraction using the smallest divisor. If necessary, you can also specify the divisor.

•This setting is valid in COMP mode only.

•This function is disabled if SIMP is set as AUTO in the setup menu.

•Message:

A."Fraction irreduc" display indicates that further simplification is impossible.

B."Non simplifiable" appears when the value you specify is invalid as a divisor for simplification.

Example: Simplify 234 by 3.

---------

678





Example: Simplify 234 (without specifying the divisor).

---------

678

37