Inputting and editing coefficients
1.Rules for inputting and editing coefficients:
-Data is inserted into the cell where the cursor is located. When you register input into a cell, the cursor moves to the next cell on the right.
-The values and expressions you can input on the coefficient editor screen are the same as those you can input in the COMP Mode with Linear format.
-Press while inputting data clears your current input.
-After inputting data, press . This registers the value and displays up to six of its digits in the currently selected cell.
-To change the contents of a cell, use the cursor keys to move the cursor to the cell and then input the new data.
2.You can clear all coefficients to zero by pressing the key while inputting values on the coefficient editor screen.
3.The following operations are not supported by the Coefficient Editor:
and
Example: Solve the following linear equations: x - y + z = 2; x + y - z = 0;
(EQN)
68