HP 3080US, 3016US Accessing Easy CD Creator Help, Disabling Disk-at-Once, Enabling Track-at-Once

CD and DVD Software

Enabling Auto Insert Notification

Auto Insert Notification settings are selected through the operating system. To verify or change Auto Insert Notification settings, see the “Installing Easy CD Creator” section, “Enabling Auto Insert Notification.”

Disabling Disk-at-Once

Disk-at-once settings are in Easy CD Copier. To select them:

1.Select Start > All Programs > Roxio Easy CD Creator 5 > Applications > CD Copier.

2.Select the Advanced tab.

3.Clear the Disk-at-Once check box.

4.Select the Set as Default button.

Enabling Track-at-Once

Track-at-once settings are in Easy CD Creator. To select them:

1.Select Start > All Programs > Roxio Easy CD Creator 5.

2.The fourth item on the status bar at the lower edge of the CD Project window indicates whether Track-at-Once or Disk-at-Once is selected.

❏If Track-at-Once is displayed on the status bar, Track-at-Once is already enabled.

❏If Disk-at-Once is selected, double-click Disk-at-Once to enable Track-at-Once.

Accessing Easy CD Creator Help

To access the procedures for using DirectCD, Easy CD Creator, and CD Copier, select Start > All Programs > Roxio Easy CD Creator 5 > Project Selector > Help radio button.

Software Guide 2–11