HP 3100 manual Connect the USB cable

15 Connect the USB cable

Windows Users:

aFollow the onscreen instructions until you see the prompt to connect the USB cable. (This may take several minutes.)

Once the prompt appears, connect the USB cable to the port on the back of the

HP All-in-One, and then to any USB port on your computer.

If you do not see this screen, see Troubleshooting in the last section.

bFollow the onscreen instructions. Complete the Fax Setup Wizard and the Sign up now screens.

Macintosh Users:

aConnect the USB cable from your computer to the USB port on the back of the device.

bDouble-click the HP All-in-One installer icon.

cMake sure you complete all screens, including the Setup Assistant.

HP All-in-One • 7