Hardware Upgrades
6.Restore power to the thin client and turn it on.
7.Install the thin client firmware. For installation instructions, refer to the Troubleshooting Guide or the HP Compaq Thin Client Imaging Tool white paper available on the HP website at www.hp.com/products/thinclientsoftware.
SODIMM Upgrade
If the thin client can be upgraded with an optional SODIMM module, use the following instructions as an overview of this procedure.
ÄCAUTION:installation. If necessary, back up any data before continuing the
✎In addition to following these instructions, follow the instructions that are applicable to the specific thin client option.
1.Complete steps 1 through 4 of the “General Hardware Installation Sequence” on page
2.Remove any existing SODIMM if one is installed.
3.Install the module into the socket at a 45° angle 1 until it clicks, then rotate the module 2 into position as shown.
Installing an Optional SODIMM
4.Complete steps 6 through 10 of the “General Hardware Installation Sequence” on page
www.hp.com | Hardware Reference Guide |
