Electrostatic Discharge
Grounding Methods
There are several methods for grounding. Use one or more of the following methods when handling or installing
■Use a wrist strap connected by a ground cord to a grounded Thin Client chassis. Wrist straps are flexible straps with a minimum of 1 megohm +/- 10 percent resistance in the ground cords. To provide proper grounding, wear the strap snug against the skin.
■Use heelstraps, toestraps, or bootstraps at standing workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats.
■Use conductive field service tools.
■Use a portable field service kit with a folding
If you do not have any of the suggested equipment for proper grounding, contact an HP authorized dealer, reseller, or service provider.
✎For more information on static electricity, contact an HP authorized dealer, reseller, or service provider.
www.hp.com | Hardware Reference Guide |
