HP 5200zl, 3500yl manual Appendix J Server-to-Switch Distributed Trunking, Limitations/Restrictions

Models: 5200zl 3500yl

1 65
Download 65 pages 15.2 Kb
Page 57
Image 57

Appendix J: Server-to-Switch Distributed Trunking

Distributed Trunking is a link aggregation technique where two or more links across two switches are aggregated together to form a trunk. This feature overcomes the limitation in IEEE 802.3ad that specifies all links of a trunk have to be from a single switch. Distributed Trunking improves resiliency and load balancing in a layer 2 network.

Distributed Trunking (DT) is included in switch software starting with version K.14. In this initial release, only Server-to-Switch Distributed Trunking is supported. For each downstream server, it sees the aggregated links as coming from a single switch, which makes any servers that support standard 802.3ad interoperate with Distributed Trunking.

Distributed trunks can be grouped together by configuring two individual DT-LACP trunks with the common trunk group name. DT ports will be aggregated dynamically after the configuration. The server/switch should support standard 802.3ad LACP on the links connecting DT switches. It is assumed LACP on the servers are configured manually on the server with a list of links to be part of the LACP trunk.

DT offers load balancing of traffic over multiple physical links. From the server to the switch, the traffic is balanced according to the load-balancing scheme configured on the server NIC. From the switch to the server, traffic is balanced according to the MAC DA and SA pair.

Two DT switches can be connected via only one Inter-Switch Connection (ISC) and DT ports can be connected only to servers. Following is the topology supported.

Limitations/Restrictions

Meshing and Distributed Trunking features are mutually exclusive.

Routing and Distributed Trunking features are mutually exclusive.

IGMP and DHCP snooping, ARP-protect, and STP are not supported on DT trunks.

Q-in-Q in mixed VLAN mode and DT are mutually exclusive.

ISC ports will be part of all VLANs—i.e., they will become members of a VLAN once that VLAN is configured.

57

Page 57
Image 57
HP 5200zl, 3500yl manual Appendix J Server-to-Switch Distributed Trunking, Limitations/Restrictions