HP 3500yl, 5200zl manual Appendix I Advanced Classifier-Based QoS, Vlan ID

Appendix I: Advanced Classifier-Based QoS

Released with software version K.14, the Advanced Classifier-Based QoS provides:

•A finer granularity than globally configured features for classifying network traffic (IPv4 or IPv6) into classes that can be used in cross-feature software configurations

•Traffic selection based on multiple match criteria:

–IP source address (IPv4 and IPv6)

–IP destination address (IPv4 and IPv6)

–Layer 2 802.1Q VLAN ID

–Layer 3 IP protocol

–Layer 3 IP precedence bits

–Layer 3 DSCP bits

–Layer 4 UDP/TCP application port (including TCP flags)

–VLAN ID

•Additional policy actions to manage selected traffic, such as rate-limiting and IP precedence marking

•Configuring service policies for features such as quality of service (QoS) and traffic mirroring

•The application of service policies to specific inbound traffic flows on individual port and VLAN interfaces (rather than only on switch-wide or port-wide traffic)

1.Determine the traffic you want to manage

2.Configure a traffic class (IPv4 or IPv6)

3.Configure a policy for one or more classes

4.Apply a service policy to an interface

match Commands

ignore Commands

QoS (policy qos)

Mirroring (policy mirror)

Default class (at end of policy configuration)

Ports

VLANs

rate-limit Command

priority Command

ip-precedence Command dscp Command

destination Command

default-class action Command

Advanced Classifier-Based QoS model

56