Getting Started

Changing the Instrument Settings

Jitter Mask Selection

Graphical displays of jitter mask selections are available. The current settings are shown by a marker on the graphical display.

Jitter Mask set to Off

To obtain a graphical display, move the cursor to RANGE, MODULATION FREQUENCY, or AMPLITUDE and press SET .

To change a value, use and to select the parameter you want to change, RANGE, MOD FREQ OR AMPLITUDE.

Press SET for a pop-up menu.

Make your selection from the pop-up menu as described in Modifying Displays with Pop-up Menus page 16 and press SET again to select the new value.

The marker on the graphical display will move to the new position and set the new value.

To exit the graphical display with the new value set, press CANCEL .

SET

22