To label parts of a sketch
To create a set of sketches
To store into a graphics variable
1.Press 
and type the text on the edit line. To lock
the Alpha shift on, press 
(for uppercase) or
(for lowercase).
To make the label a smaller character size, turn off
before pressing 
. (
is a toggle between small and large font size). The smaller character size cannot display lowercase letters.
2.Press 
.
3.Position the label where you want it by pressing the
, 
, 
, 
keys.
4.Press 
again to affix the label.
5.Press 
to continue drawing, or press
to exit the
Sketch view.
You can create a set of up to ten sketches. This allows for simple animation.
•After making a sketch, press 
to add a new, blank page. You can now make a new sketch, which becomes part of the current set of sketches.
•To view the next sketch in an existing set, press
. Hold 
down for animation.
•To remove the current page in the current sketch
series, press 
.
You can define a portion of a sketch inside a box, and then store that graphic into a graphics variable.
1.In the Sketch view, display the sketch you want to copy (store into a variable).
2.Press 
.
3.Highlight the variable name you want to use and press 
.
4.Draw a box around the portion you want to copy: move the cursor to one corner, press 
, then move the cursor to the opposite corner, and press 
.
Notes and sketches |