To draw a box | 1. In Sketch view, press | and move the cursor to |
| where you want any corner of the box to be. | |
2.Press 
.
3.Move the cursor to mark the opposite corner for the box. You can adjust the size of the box by moving the cursor.
4.Press 
to finish the box.
To draw a circle 1. In Sketch view, press 
and move the cursor to where you want the center of the circle to be.
2.Press 
. This turns on circle drawing.
3.Move the cursor the distance of the radius.
4.Press 
to draw the circle.
DRAW keys
Key Meaning
Dot on. Turns pixels on as the cursor moves.
Dot off. Turns pixels off as the cursor moves.
Draws a line from the cursor’s starting position to the cursor’s current position. Press 
when you have finished. You can draw a line at any angle.
Draws a box from the cursor’s starting position to the cursor’s current position.
Press 
when you have finished.
Draws a circle with the cursor’s starting position as the center. The radius is the distance between the cursor’s starting and ending position. Press 
to draw the circle.
Notes and sketches |