To transmit an aplet

1.Connect the PC or aplet disk drive to the calculator by cable

or

align the two calculators’ infrared ports by matching up the triangle marks on the rims of the calculators. Place the calculators no more than 2 inches (5 cm) apart.

2.Sending calculator: Open the Library, highlight the

aplet to send, and press .

–You have two options: another hp 39g+ or a disk drive on a PC. Highlight your selection and press .

–If transmitting to a disk drive, you have the options of sending to the current (default) directory or to another directory.

3.Receiving calculator: Open the aplet library and

press .

–You have two options: another hp 39g+ or a disk drive (or computer). Highlight your selection and press .

The Transmit annunciator— —is displayed until transmission is complete.

If you are using the PC Connectivity Kit to download aplets from a PC, you will see a list of aplets in the PC’s current directory. Check as many items as you would like to receive.

Sorting items in the aplet library menu list

Once you have entered information into an aplet, you have defined a new version of an aplet. The information is automatically saved under the current aplet name, such as “Function.” To create additional aplets of the same type, you must give the current aplet a new name.

The advantage of storing an aplet is to allow you to keep a copy of a working environment for later use.

The aplet library is where you go to manage your aplets.

Press . Highlight (using the arrow keys) the name of the aplet you want to act on.

Extending aplets

17-5