’’’’;’’EXP.ANG’’;0;
The program EXP.ANG is a small routine that is called by other programs that the aplet uses. This entry specifies that the program EXP.ANG is transferred when the aplet is transferred, but the space in the first quotes ensures that no entry appears on the menu.
’’Start’’;’’EXP.S’’;7:
This specifies the Start menu option. The program that is associated with this entry, EXP.S, runs automatically when you start the aplet. Because this menu option specifies view 7, the VIEWS menu opens when you start the aplet.
You only need to run this program once to configure your aplet’s VIEWS menu. Once the aplet’s VIEWS menu is configured, it remains that way until you run SETVIEWS again.
You do not need to include this program for your aplet to work, but it is useful to specify that the program is attached to the aplet, and transmitted when the aplet is transmitted.
7.Return to the program catalog. The programs that you created should appear as follows:
8.You must now 
the
program EXP.SV to execute the SETVIEWS command and create the modified VIEWS menu. Check that the name of the new aplet is highlighted in the Aplet view.
9.You can now return to the Aplet library and press
to run your new aplet.
This section describes the commands for programming with hp 39GS. You can enter these commands in your program by typing them or by accessing them from the Commands menu.
Programming |