1 Connecting to a Netware 3.12 Server
Windows 95 SR2
Windows 95 SR2 | Requirements |
| • HP Vectra with Windows 95 SR2 installed. |
| • 3COM Etherlink |
| File Name: Elnk3.VXD Size: 30KB Date: 7/18/96 |
| • Windows 95 SR2 media. |
| • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, |
| and NWLink NetBIOS transfer protocols. |
Device Configuration
• | I/O Base Address | 300 |
• | Interrupt Request Level | 10 |
• | Boot PROM | Disabled |
• | Transceiver Type | Auto Select |
• | Network Driver Optimization | Windows or OS/2 Client |
• | Maximum Modem Speed | 9600 Baud |
• Plug and Play Compatibility | Disabled | |
• | Full Duplex | Disabled |
Procedure
1With the HP Vectra turned off install the 3COM Etherlink III
2Power on the machine and restart Windows 95 SR2 in
3Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM’s website) and execute 3C5X9CFG.EXE.
4Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “Device Configuration.”
5If changes are required, save those changes and exit.
6Remove the 3com cards driver diskette and restart the machine.
7After windows loads, click on “Start,” to “Settings” and over to “Control Panel.”
8Double click on “Network” and select “Add.”
