chapter 4
increase copy speed or quality
The HP Digital Copier Printer provides three options that affect copy speed and quality.
•Best produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies more slowly than the other quality settings.
•Normal delivers
•Fast copies faster than the Normal setting. The text is of comparable quality to the Normal setting, but the graphics may be of lower quality. Using Fast also cuts down on the frequency of replacing your print cartridges, because it uses less ink.
1Load your original on the glass or in the ADF.
2Press Quality until the green light in front of the desired quality is lit.
3Press Start Copy, Black or Start Copy, Color.
set the number of copies
You can set the number of copies using the
1Press Number of Copies to enter the number of copies mode. There are four ways to set the desired number of copies:
–Press Number of Copies again (or repeatedly) to increment the displayed number.
–Press to increment, or to decrement, the displayed number.
–Use the keypad to enter the desired number of copies.
–Press + on the keypad to increment, or – to decrement, the displayed number.
2Press Start Copy, Black or Start Copy, Color.
reduce or enlarge a copy
You can reduce or enlarge a copy of an original using either the Reduce/Enlarge button or the Special Features button. This section explains the Reduce/Enlarge button only. For information on using the Special Features button, see perform special copy jobs on page 14.
1Press Reduce/Enlarge to choose one of the following:
–Custom 100% — lets you enter the percentage to reduce or enlarge your copy
–Full Page 91% — reduces an original to 91% of its original size, which prevents cropping that may occur if you make a
–Legal
Note: You can only copy a
2If you are using the Custom option, press or to reduce or enlarge the copy.
12 | hp digital copier printer 410 |