12 Hewlett-Packard Jornada 420 Palm-size PC

This view of the left side of the HP Jornada shows how to

insert the battery.

To install the battery

1.Release the battery door by pushing the stylus into the small hole above the door. Then, slide the door down and off.

2.Slide the battery into the battery slot. If the battery does not slide in easily, check the battery orientation and try again. If you are putting the battery in correctly, you do not need to force it.

3.Replace the battery door, and slide it up until it snaps shut.

After you install the battery, the HP Jornada turns on automatically. Before using your P/PC on battery power, though, you should charge the battery by connecting the AC adapter. You can use the P/PC while charging. Charging the battery takes approximately 3 to 4 hours. For information on connecting the AC adapter, read the next sections.