Chapter 5 Sending and receiving e-mail 59

·the POP3 host name of your ISP

·the SMTP host name of your ISP (if required by your ISP)

Setting up a dial-up connection to your ISP

After you have established an account with an ISP, you can set up a connection on the HP Jornada and send and receive e-mail whenever you want.

To set up a dial-up connection

1.On the Start menu, tap Programs, tap Communication, and then tap Connections.

2.In the Connections folder, double-tap Make New Connection, and type a name for the connection.

3.In the Make New Connection dialog box, select Dial- Up Connection, and then tap Next.

4.Select the down-arrow button next to the Select a modem box, and highlight the name of your modem.

If you do not see your modem listed in the drop-down list, your modem may not be properly connected to your P/PC. Make sure that the modem is connected to your P/PC properly, based on the installation instructions that came with the modem.

5.Tap Next and fill in the phone number you wish to dial. Tap Finish. A new icon appears with the name you specified in the Connections folder. This connection also appears on the Start menu in the Connections submenu.

Connecting to your ISP

After you have configured your connection to your ISP, you are ready to connect your phone line to your modem, and then dial in. Make sure you connect to the phone line supported by your modem, follow the instructions provided by the manufacturer. Most CompactFlash Card modems use analog phone lines.